top of page

RIGS FOR SALE

Atlas Copco 3001

Item# 1023

  • With 10 foot feed and PQ head

  • Truck mounted on tandem axle Peterbuilt

  • Built in 2007

  • Rebuilt in 2010

  • Total time 37,000 hours​​

  • Sold as is, where is, with no warranties expressed or implied. Available subject to prior sales.

  • Price $235,000 or best offer

Please reload

Atlas Copco 3001

Atlas Copco CS1500

Item# 1022

  • With 10 foot feed and PQ head

  • Truck mounted on 4 wheel drive International Paystar

  • Built in 2006

  • Rebuilt with stronger mast and 18,000 pound hoist (replaced 12,000 pound hoist)

  • Total time 23,600 hours​

  • Sold as is, where is, with no warranties expressed or implied. Available subject to prior sales.

  • Price $125,000 or best offer

Please reload

Atlas Copco CS1500

Atlas Copco CT20

Item# 1028

  • With 10 foot feed and PQ head

  • Truck mounted on tandem axle Peterbilt

  • Built in 2011

  • Total time 16,400 hours

  • Price US$375,000 ex USA

  • Sold as is, where is, with no warranties expressed or implied. Available subject to prior sales.

Please reload

Atlas Copco CT20

Atlas Copco U6

Item# 1024

  • Heavy duty

  • Skid mounted

  • Both surface and underground power packs

  • Built in 2007

  • Total time 4,400 hours​​

  • Sold as is, where is, no warranties expressed or implied.

  • Available subject to prior sales.

  • Price US$255,000 or best offer

Please reload

Atlas Copco U6

BBurg HD 1450 Drill and Blast Rigs

Item# 1002

  • Brand new and haven't drilled a hole

  • 3 available

  • Manufactured in 2016

  • Drill hole range 3 ½ to 6”

  • Drill rods GT 60/87mm

  • Compressor volume 14m³

  • Arm versions, Single

  • Application, large quarries, mining

  • Located in Africa

  • €450,000 each

  • For further information please contact us.

Please reload

BBurg HD 1450

BBurg HD 1600 Drill and Blast Rigs

Item# 1003

  • Brand new and haven't drilled a hole

  • 2 available

  • Manufactured in 2016

  • Drill hole range 3 ½ to 8 ½”

  • Drill tube 114/127/140mm

  • Compressor volume 30M³

  • Application, Large quarries, mining

  • Located in Africa

  • €550,000 each

  • For further information please contact us.

Please reload

BBurg HD 1600

Bourne 1500R Drilling Rig

Item# 1026

  • Bourne 1500R drilling rig for sale.

  • Mounted on a 1979 leader.

  • Onboard CP45 development compressor and 5 x 6 duplex mud pump.

  • Contact us to arrange an inspection today.

Please reload

Bourne 1500R

Boart Longyear LF 230

Item# 1035

  • Pullback/pulldown: 30 T / 20 T

  • Depth capacities: HQ 1200m, NQ 2000m

  • Drilling methods: Diamond core drilling

  • Engine type: Doosan 806 T1 Engine

  • Drilling Rig Carrier: Truck mounted (AMC) 

  • Equipment: FMC Triplex mud pump W11 (190 L per minute)

Please reload

Boart Longyear LF 230

CT14 Rigs

Item# 1017

  • Two CT14 rigs for sale.

  • One mounted on a IVA track base, built in 2011 with 4100 hours on the clock.

  • The second rig is mounted on a 2000 built Acco. This rig has 5800 hours on the clock and was also built in 2011.

  • Both rigs are well maintained and both are gas and minesite compliant.

  • Full rope and mast NDT reports are available on request.

  • Both rigs have been set up with twin bean pumps.

  • Both have recently come off drilling contracts and are ready to drill.

  • Under instructions from the owner, prices now have dropped to $150k each negotiable.

Please reload

CT14 Rigs

DE810

Item# 1031

  • 2008 DE810 mounted on a 2008 Mercedes Benz Actros 8x8 Truck.

  • Onboard Sullair compressor

  • The rig has had an extensive rebuild in 2017 and was completed early 2018

  • The rig has 2500 hours on the clock

  • The rig carrier has 12,000kms

  • Come with a Rod spinner, Rod handler

  • All compliance and NDT reports available upon request.

  • This rig will pass any mine site regulations and is ready to drill immediately.

  • Located in Queensland, Australia.

  • Contact us for pricing and further information.

Please reload

DE810

Diamec 260

Item# 1030

  • Diamec 260 multipurpose drilling rig for sale.

  • Mounted on a 5 tonne trailer powered by a hatz engine.

  • Built for mud rotary or diamond drilling.

  • Swing away control panel.

  • Located in Ireland.

  • Ready for work. Priced to sell.

Please reload

Diamec 260

DR950

Item# 1038

  • 2012 McCulloch DR950 multipurpose drilling rig for sale.

  • Track mounted with 3000 hours, rod handler.

  • No onboard air.

  • Located in NSW.

  • Contact us for any further information.

Please reload

DR950

DT450 All Terrain Buggy Rig

Item# 1005

  • Independent axles and steering

  • Can literally go anywhere

  • NQ to 450m

  • RC to 150m

  • As is, where is A$139,000 or professionally painted for A$149,000

  • Located in QLD

Please reload

DT450

Edson 3000

Item# 1018

  • Edson 3000W rebuilt in 2008 mounted on a 1985 Acco.

  • This rig is set up for air and mud rotary and can drill to 200m

  • Comes with a must dump and set up for angle and vertical holes.

  • No bean pump with rig.

  • Priced for a quick sale $65,000 plus GST

  • Contact us for more information.

Please reload

Edson 3000

2100 Excavator

Item# 1027

  • 2100 Excavator mount drill rig.

  • Approx 100 hours fully service with electrics, hydraulics and all other functions checked and operating correctly.

  • Tooling also with Oiler included. 

  • $95,000.00

Please reload

2100 Excavator

Hanjin P6000 (1)

Item# 1032

  • Pullback/pulldown: 16 T / 08 T

  • Depth capacities: HQ 600m, NQ 1000m

  • Drilling methods: Diamond core Drilling

  • Engine type: Hyundai 6BT, 6 cylinder Engine

  • Track-mounted

  • Equipment: FMC Triplex mud pump W11 (190 L per minute)

Please reload

Hanjin P6000 (1)

Hanjin P6000 (2)

Item# 1033

  • Pullback/pulldown: 16 T / 08 T

  • Depth capacities: HQ 600m, NQ 1000m

  • Drilling methods: Diamond core drilling

  • Engine type: Hyundai 6BT, 6 cylinder Engine

  • Track mounted 

  • Equipment: FMC Triplex mud pump W11 (190 L per minute)
     

Please reload

Hanjin P6000 (2)

Hydropower Scout

Item# 1020

  • Hydropower Scout for sale, manufactured in 2006.

  • Mounted on a 2006 Hino (4x4) with 80,391kms

  • Onboard 1000ltr fuel tank and fire suppression system.

  • 1.8m dump mast, rotation speeds from 0 - 150 and 0 - 700 RPM​

  • $145,000 ONO

Please reload

Hydropower Scout

Hanjin P7000

Item# 1034

  • Pullback/pulldown: 30 T / 20 T

  • Depth capacities: HQ 1200m, NQ 2000m

  • Drilling methods: Diamond core drilling

  • Engine type: Doosan 806 T1 Engine

  • Drilling Rig Carrier: Truck mounted (AMC) 

  • Equipment: FMC Triplex mud pump W11 (190 L per minute)

Please reload

Hanjin P7000

KWL400H

Item# 1021

  • Fully refurbished in 2018 by Austex in WA

  • Mounted on a 2003 MAN

  • POA

​

Please reload

KWL400H

Macdrill 1000 Waterwell Rig

Item# 1037

  • Custom Macdrill 1000 waterwell rig.

  • Located in NSW.

  • Onboard air, comes with rods and hammer.

  • Contact for more information and pricing.

Please reload

Macdrill 1000 waterwell rig

Midway 1500 Rotary Table Drive Rig

Item# 1025

  • For sale Midway 1500 rotary table drive rig.

  • Full respray and repair in 2015.

  • Mounted on a 1985 International (unregistered).

  • Onboard development compressor and a 5 x 6 Duplex mud pump.

  • Mounted toolboxes for storage.

  • This rig is ready to drill. Call for an inspection today.

Please reload

Midway 1500

MPD 180

Item# 7001

This rig has ongoing business with various geotechnical engineering companies in NSW. It is only 18 months old with 724 hours on the clock and currently set up for Geotechnical drilling. The rig is MDG15 certified and is mine site compliant. It can drill to the following depths: HQ to 500m / NQ to 800m

​

This package includes the following.

  • MPD180 drilling rig built in 2017

  • Hino Kestrel support truck equipped with a water tank Drill rods and associated equipment.

  • Various augers strings

  • Various rod strings

  • Cyclone and stuffing boxes

  • Drill bits, reamers, shoe bits, casing advancer, tri cones and blade bits

  • HQ wireline packer system

  • Various associated equipment


Contact us for further information and pricing.

Please reload

Reichdrill C550 D11

Reichdrill C550 D11 Drill and Blast Rigs

Item# 1008

  • Brand new and haven't drilled a hole

  • 6 available

  • Manufactured in 2016

  • Drill Hole Range 5 to 6.75”

  • Drill rods 102 to 140mm

  • Compressor volume 38.6m³

  • Application, large quarries, mining

  • Located in Africa

  • €600,000 each

Please reload

Sandvik DE150

Item# 1039

  • 1 x DE150 Brand New (YOM 2012)

  • 1 x DE150 Recently Refurbished (Approximately 7,500 hours before refurb) (YOM 2012)

  • 132kw (180hp) 440v Trailer Mounted Power Packs

  • Direct Feed (No Chains)

  • 15t (33,000 pounds) Push/Pull

  • Drills P, H, N (Rated 2,000m NQ and actually been down 1,934m)

  • Both machines located in South East Asia and can be shipped in 1 x 20” FCL

Please reload

Sandvik DE150
Sandvik DE880

Sandvik DE880 Rig

Item# 1009

  • New! Hasn’t drilled a hole!

  • The DE880 is a multi-purpose drill rig with an upgraded engine featuring a heavy-duty main hoist mounted on an extra sturdy platform.

  • Been to site but returned to the yard without a hole drilled.

  • Track mounted

  • Only 80 hours on the clock

  • Located in Asia

Please reload

2012 Schramm T450GT

Item# 1012

  • Hours approximately 3477

  • 1050/350 air compressor

  • CAT 315L track undercarriage with remote control tramming system

  • Swing away control panel

  • RC swivel and sampling cyclone and wet splitter

  • Slide angle mast

  • 2 winches

  • FMC Bean injection pump model LO918

  • Miller model 250 Bobcat welder

  • Factory manuals

  • $450,000 delivered to any port in Australia

Please reload

2012 Schramm T450GT

2011 Schramm T450GT

Item# 1013

  • Hours approximately 2986

  • 1050/350 air compressor

  • CAT 315L track undercarriage with remote control tramming system

  • Swing away control panel

  • RC swivel and sampling cyclone and wet splitter

  • Slide angle mast

  • 2 winches

  • FMC Bean injection pump model LO918​

  • Miller model 250 Bobcat welder

  • Factory manuals

  • $450,000 delivered to any port in Australia

Please reload

2011 Schramm T450GT
2010 Schramm

2010 Schramm T450GT

Item# 1014

  • Hours approximately 3613

  • 1050/350 air compressor

  • CAT 315L track undercarriage with remote control tramming system

  • Swing away control panel

  • RC swivel and sampling cyclone and wet splitter

  • Slide angle mast

  • 2 winches

  • FMC Bean injection pump model LO918

  • Miller model 250 Bobcat welder

  • Factory manuals​​

  • $450,000 delivered to any port in Australia

Please reload

UDR 1000

Item# 1016

  • UDR1000 mounted on a 8x8 MAN 1989.

  • This URD has had a High Capacity upgrade in the past and has a UDR 1200 head.

  • Two 535 bean pumps for deep directional drilling.

  • Onboard 900 x350 Sullair compressor.

  • The rig and carrier have undergone an extensive bare metal sand blast and respray within the past twelve months.

  • Located in NSW and ready to drill.

  • $395,000

  • Contact us for any further information.

Please reload

UDR 1000

Vermeer 36/50 HDD Rig

Item# 1029

  • Very tidy 36/50 long rod for sale.

  • 3000 hours on the clock comes with sond, box and some tooling.

  • Very well maintained and serviced.

  • Asking price A$165,000.

  • Located in Brisbane, Australia.

Please reload

Vermeer 36/50
Vermeer HDD Rig

Vermeer HDD Rig

Item# 1011

  • Vermeer 100 x 120

  • In excellent condition! Year 2007

  • 4600 hours in excellent condition

  • All four drive motors on rack and pinion have been replaced

  • Fitted with extra e stops, battery and starter motor isolation, and jump start receptacle

  • Can be unloaded on any road surface with rubber tracks off-road profiler 

  • Comes with:

    • 6 x 9 rod baskets

    • 3 x 15 rod baskets

    • 74 fire stick 2 rods

  • A$345,000 plus GST​​

Please reload